The iPhone technical specifications mention nothing about how much RAM is included nor how fast the CPU is running. Now that I have a toolchain, it was a simple task to take some code from iPulse to investigate.
Note: Apple has obviously not documented the system level APIs that I’m using to extract this information, so take these numbers with a grain of salt. Personally, I doubt that they would bother to make these low-level functions report erroneous information just to protect some consumer spec sheet, so it’s likely that they’re close if not exact.
First, let’s start off with memory. Calling host_statistics() with HOST_VM_INFO returns a count of the number of memory pages in use (the “vm_stat” tool at the command line does the same thing.) Totaling these counts shows that there are 19,500 pages of memory with each page being 4096 bytes. That’s 78,000 KB or 76.2 MB.
Another way to determine memory size is by calling sysctl() with CTL_HW and HW_PHYSMEM. This results in 121,634,816 bytes or 117 MB being reported for physical memory. Similarly, user memory is reported as 93,605,888 bytes or 89.3 MB—close to the 76.2 MB reported by host_statistics(). These calls are equivalent to using “sysctl hw.physmem” and “sysctl hw.usermem” from the Mac OS X command line.
None of these numbers are the nice round powers of 2 that we’re so accustomed to. I suspect that there is some kind of memory partitioning: something like a graphics chip could be using 11 MB of memory and that combined with the 117 MB of physical memory would bring the RAM total to 128 MB.
Now let’s take a look at the CPU speed. Again, sysctl() is our friend, this time using CTL_HW with HW_CPU_FREQ and HW_BUS_FREQ. The results of our test show that the CPU is specified at 400 Mhz with a bus frequency of 100 Mhz.
There have been various hardware reports that place the ARM chip’s frequency above 600 Mhz. Maybe sysctl() is lying to us, or maybe the CPU is clocked down to give improved battery life. Only Apple knows that for sure.
For those of you who care, the source code used for the tests is available.